European CNC-Network Forum

COMENIUS T4EU-R --- WORK LINE B - Wagon Components (see also new WORKLINE E!!!) => Track Parcours => Topic started by: [LU] Jean-Jacques Zeimes on July 19, 2012, 03:36:30 PM

Title: Bent track segment with thread insert
Post by: [LU] Jean-Jacques Zeimes on July 19, 2012, 03:36:30 PM
Hello,
Attached you will find the drawing of the bent track segment with thread insert as pdf-file.

Greetings from Luxembourg
Paul and Jean-Jacques
Title: Re: Bent Track Segment - Connector recess
Post by: [DE] Jörg Fritsch on August 21, 2012, 08:34:44 AM
Hello Luxembourg, hello Train Family,
thank you for the drawings of the tracks. We will now start to produce them.

But you have to pay attention to the recess in the tracks.
We decided in Celje that the recess for the connectors should be with tolerances.
diameter 48 +0,1/+0,3 (in the drawing R24)
 So it will be sure that the parts fit together .
Greetings from Germany
Jörg Fritsch

Title: Re: Bent track segment with thread insert
Post by: [NL] Marc van Erp on October 24, 2012, 12:26:56 PM
hello train family,

Is there also a CAD file or Solidworks file of the bent track segment?


Greetz.

Marc van Erp
NL
Title: Re: Bent track segment with thread insert
Post by: [NL] Marc van Erp on November 14, 2012, 12:52:05 PM
Repeat!

hello train family,

Is there also a CAD file or Solidworks file of the bent track segment?


Greetz.

Marc van Erp
NL
Title: Re: Bent track segment with thread insert
Post by: [LU] Jean-Jacques Zeimes on January 14, 2013, 10:51:07 AM
Hello,

Please refer to the topic "Cross And Bent Segment"

Kind regards,
Jean-Jacques